Metallic syphon breaker for Boat Motor

Anti Syphon Systems

When the injection point of the cooling water inside the boat's exhaust is located less than 15 cm above the waterline, there is a risk of cooling water entering the inboard engine due to the siphon effect. This situation can be resolved by installing a syphon breaker in the cooling water duct. The boat's anti-siphon is connected through a pipe to a hull fitting and must always be mounted above the waterline to purge excess water to the exterior. Supplied without hoses.

Part Number Description DAHLDD
60730011 Metallic Air Vent 38 mm 38 MM240 MM178 MM8 MM
60730014 Metallic Air Vent 42 mm 42 MM220 MM178 MM8 MM
60730026 Metallic Air Vent 45 mm 45 MM240 MM178 MM8 MM
60730027 Metallic Air Vent 40 mm 40 MM240 MM178 MM8 MM
60730029 Metallic Air Vent 25 mm 25 MM236 MM178 MM8 MM
60730031 Metallic Air Vent 27 mm 27 MM239 MM178 MM8 MM
60730033 Metallic Air Vent 30 mm 30 MM236 MM178 MM8 MM
60730035 Metallic Air Vent 32 mm 32 MM239 MM178 MM8 MM
60730037 Metallic Air Vent 35 mm 35 MM239 MM178 MM8 MM
60730039 Metallic Air Vent 20 mm 20 MM204 MM138 MM8 MM
60730041 Metallic Air Vent 22 mm 22 MM206 MM138 MM8 MM
60730042 Metallic Air Vent 12 mm 12 MM194 MM138 MM8 MM

Downloads